3D-printed Accessories for the Fun Scale Models Ju87 STUKA

$1.50$9.00

Stuka Parts

Description

In addition to the spinner we offer, Rabid Models also has some additional lightweight parts you may order “a la carte” which were designed specifically for the Fun-Scale Models JU-87 Stuka model!  We have scale black rubber treaded tires, scale wheel hubs, and an optional 250KG-size model bomb!  Please see the pictures below!

Airplane not included!  This picture shows Derek’s prototype model with the spinner and custom wheels installed. Derek painted the spinner and wheel hubs to match his model.  The “Fun Scale Models” Ju-87 STUKA Park-flyer is offered as a laser-cut short kit by Manzano Lazer works (click here).  Rabid Models offers a custom-designed 3D-printed 3-blade spinner for the Stuka: (click here)

In addition, we offer the brushless motor, ESC & propeller for this model as well!

PARTS SPECIFICATIONS:

SCALE STUKA TIRE: black flexible TPU with tread detail.    44.1mm diameter (1.73 in.), 10mm width.    (Note: 2 tires are required for the model)

DETAILED WHEEL HUB SET: white PETG.    28mm diameter (1.1inch) — 2 hub halves are in the set – order one set for each tire.  Glue the hubs onto the tire, then carefully drill holes for your axle.  The hubs are not painted.

Weight: about 10 gms total for one complete assembly (one tire and one hub set).

NOTE: the Stuka will require two sets of tires and wheel hubs.  These various parts are available in sets or you can order them separately.

MODEL BOMB: white PETG.  106.7mm long (4.2 in.)  21.7mm diameter (0.85 in)

                   Weight: 11gm (2 hollow pieces glued together by customer)

The bomb does not come with any mounting hardware.  Also, it doesn’t explode.

3D-printed parts are unpainted but require very little preparation – they can be painted with any plastic-compatible paint.  Painting is recommended because all plastics will deteriorate over time if exposed to sunlight.  The wheel hub parts and bomb parts can be glued together with CA or Foam-Tac cement.  The two hub halves are designed to be glued onto the wheel and have starter holes for the axle – drill out the holes to match the axle wire size you are using. The Model Bomb has two pieces that are glued together. The bomb is hollow and does not include mounting hardware.

 

Additional information

Weight .25 lbs
Dimensions 3 × 4 × 6 in
Choose Item

Two Tires & 2 hub sets (Stuka), Single Tire & hub set (Stuka), Single Stuka Tire, Wheel Hub Set for Stuka, Model 250KG Bomb (Stuka)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.