Two GS-1502 Linear Servos for small models

Description

This sale is for a PAIR of linear servos – which are typically used in small models but can have other applications.  They are very small and light (1.5gms each) with a 7mm stroke (3.5mm each way) and come with a micro JST plug.  (You may cut the plug off and install a standard RC connector if needed.)  It has a high-torque motor with fast response.  The circuit board can be installed on your model with 4 screws or you may simply use hot glue.

Brand: 9imod Model: GS-1502
Type: sub micro linear servo
Operating Voltage: 3.7V – 5V
Torque: 80g-cm (1.11 oz-in)
Speed: 0.12sec/deg
Weight: 1.5g (0.053 oz)
Dimensions: 21.4 x 15.2 x 12mm (0.84″ x 0.60″ x 0.47”)
Features: coreless motor, nylon gear, bushing axis, micro JST connector, 95mm cable

NOTES:

The two units are “left” and “right” types.  This is because in most cases, they cannot be flipped around since the gear on the one end will interfere with pushrods.

Important – the gears can sometimes get stuck at their extremes. For best results use the “travel adjustment” on your radio to reduce the throw a bit, say 98% instead of 100, to prevent the servo from maxing out on either end. Just a tiny reductiont helps. Otherwise you risk having one of your control surfaces getting stuck at an extreme.