Custom 57mm spinner for P51
This 57mm diameter (2.25 inches) 3D-printed 4-blade spinner was custom-designed to be the correct scale shape for use on a model P-51 Mustang or Spitfire. This spinner was designed specifically for an E-Flite 9.8×6 4-blade propeller (please see the picture below). The spinner requires a propeller and prop adapter, which are not included! Important note: this product is for electric motors and props only.
The spinner consists of a cone and a backplate. The backplate has an 8mm center hole (same size as the prop) – the backplate and propeller may need to be enlarged to fit your prop adapter. The propeller and prop adapter is NOT included. Once the prop and backplate are mounted to the motor, the cone simply snaps on – no hardware needed!
The plastic parts are unfinished but can be sanded smooth and painted with any plastic-compatible paint. Painting is recommended because plastics will deteriorate over time if exposed to sunlight.
White PETG. Weight 26 gms total (cone and backplate).
The diameter at the base is 57mm (2.25 inches)
Required Propeller: E-Flite part# EFLP98604E 9.8×6 4-blade
|Dimensions||3 × 4 × 6 in|