Servo Tester for RC


Servo Tester

4 in stock


SERVO TESTER – CCPM Servo Consistency Master

Use this very small & handy device to test your servos – center them up before installing in your RC airplane, heli, or boat.  Plug your 1S or 2S Lipo Battery into one side, and you can plug one, two, or three RC servos into the other side.   TAKE CARE– do not plug the battery in backwards or it will burn the unit out!  And this is meant to test small servos, not large servos over 2oz.

Voltage: DC 4.8-6V
Size: 35 x 32 x 13mm  (approx)
Weight: 31.5 gram  (just over 1 oz)

There are 3 modes using the “select” button:
1) Manual mode (default): turning the knob operates the servo.
2) Median mode: make the servo go back to the neutral (median) point.
3) Automatic “window wiper” mode: make the servo swing like window wipers (full travel one way to the other way).

The device also can also be used as the “throttle” to check your ESC (electronic speed controller) to test your motor system without using a transmitter or receiver.

This picture is an example.  ONLY test motors with NO propeller attached!

Additional information

Weight .1 lbs
Dimensions 1 × 6 × 9 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.