MICRO control horns (for small models) --4 pcs

These custom-designed control horns can be inserted & glued into a foam control surface or glued directly into a balsa structure. There are THREE different kinds (Two 3D-printer and one plywood) - these are for SMALL R/C models.

One is a little taller with a larger gluing surface. Hopefully the pictures are explanatory.  The horns have a very small "starter hole" for the pushrod z-bend, which you can enlarge. Suitable for .032-size wire or smaller.  All are sold in a pack of 4 pieces.

Note: the smaller white one is the one used in Derek Micko's FSM Corsair for the aileron and elevator.

Dimensions for the 3D-printed parts: the blade is about 1/4" (7mm)_long and 1/16" thick. When embedded in 5mm foam, the attachment point for the smaller one is about 5mm above the surface. The taller one has two small holes for better glue adhesion and the attachment point is about 1cm above the surface.  Weight: 0.15gm each. White PETG plastic.

Dimensions for the plywood part: the blade is 1 inch long.  1/32" thick plywood. There are two pushrod attachment holes. When embedded in 5mm foam, the attachment point is about 1cm above the surface.

These products were designed and manufactured by Rabid Models in-house! 

We also have a larger version! Click here!