MICRO control horns (for small models) - 4 pcs

hese custom-designed control horns can be inserted & glued into a foam control surface or glued directly into a balsa structure. There are THREE different kinds (Two 3D-printed and one plywood) - these are for SMALL R/C models.

Two 3d-printed control horns.  One is tiny, for use in thin foam. The other is little taller with a larger gluing surface for thicker foam. Hopefully the pictures are explanatory.  The horns have a very small "starter hole" for the pushrod z-bend, which you can enlarge. Suitable for .032-size wire or smaller.  All are sold in a pack of 4 pieces.

Note: the smaller white one is the one used in Derek Micko's FSM Corsair for the aileron and elevator.

Dimensions for the 3D-printed control horns:

Small: 12.7x12x1.5mm    The mounting blade is about 2mm tall. When embedded in 2mm foam, the attachment point for the smaller one is about 7mm above the surface. 

Taller: 13x15x1.7mm   For use in thicker foam - it has two small holes in the larger 5mm blade for better glue adhesion and the attachment point is about 8mm above the surface.  Weight: 0.15gm each. White PETG plastic.

Dimensions for the plywood part:  1.25" x 3/4" x 1/32"   The blade is 1 inch long.  There are two pushrod attachment holes. When embedded in 5mm foam, the attachment point is about 10mm above the surface.

These products were designed and manufactured by Rabid Models, Copyright © 2024. Made in the USA.   

We also have a slightly larger version!  Click here!