3300uf 16V Receiver GLITCH Protector

This is a 3300uf capacitor with a male connector, simply plug it into any unused channel on your receiver (or use a Y harness).

This is one of the most important and cheapest protections you can get for your RC model!  The capacitor protects against momentary "glitches" caused by low voltage in your airborne RC system- which can happen when some devices such as Servos or Gyros draw too much current.   For example, when a retract servo gets hung up for a moment.

Prevents receiver and flight control shutdowns due to voltage drops

Improves overall system reliability and flight safety

Reduces interference and signal instability

Highly recommended (by ME) if you use a separate gyro or if your receiver has a built in gyro (stabilization), because gyros generate current loads which can cause a voltage drop - then your receiver stops working, which can be extremely annoying and cause you to use unnecessary swear words spontaneously!    This happened to me!

• High Capacity & Voltage Rating: 3300µF capacitance with a 16V rating provides robust energy storage and protection against voltage spikes.
• Plug-and-Play Design: Pre-soldered standard plug for direct connection to receiver channels, eliminating the need for complex soldering.
• Universal Compatibility: Works seamlessly with popular RC receivers (FUTABA, FLYSKY, SPEKTRUM) and flight controllers (A3), making it ideal for drones, multirotors, and fixed-wing aircraft.
• Enhanced Stability: Reduces power ripple and prevents receiver or flight control rebooting due to voltage drops during high-load conditions, such as rapid acceleration or motor stall.

IMPORTANT NOTE: plug into any unused channel (or use a Y-cable) of your receiver but DO NOT plug it into the throttle channel.