3D Spinner Set (PAIR) for the Rabid Models 34" Do-335 "Arrow"

This is a custom-designed 3D spinner set designed specifically for the Do-335 Pfeil model from Rabid Models. The 35mm-diameter spinners are designed to work with 9x7 standard-rotation 3-bladed GWS-style propellers and prop adapters (these are not included but available separately from Rabid Models).

The front spinner (shown in the picture below) is acorn-shaped and has a scale cannon hole in the center. The rear spinner is the same 35mm diameter but is longer (47mm) and conical shaped. You will need two 9x7 standard-rotation propellers and two prop adapters (not included, but available from Rabid Models).

The set includes two spinners and two backplates. The cone snaps onto the backplate, so there is no hardware necessary other than a prop adapter. Please note, the backplate has a small "starter" hole which will need to be carefully enlarged to fi whatever prop adapter you're using.  Also, you may need to "shave down" the hubs of the props to allow the prop adapter to come through - because the hubs are quite thick. 

The 3D-printed plastic spinners are supplied WHITE but are paintable. The 3D plastic is somewhat "rough" but can be smoothed by using sandpaper (mount the spinner on a screw and spin it using a cordless drill).

This picture shows the front spinner and the new 3D-printed cowl that we offer mounted on the prototype Rabid Models DO335!