10gm 2000kv brushless motor

The 10gm 2000kv brushless motor (also called 1811) is an excellent little motor that can handle a variety of props and can be used with 1S, 2S, or 3S Lipo batteries. Typical propeller when used with a 3S battery is a 2-blade 6x3, and on the Rabid Models 28" twin-engine models we use a 3-bladed 5x3 or 5x4 propeller (that propeller is close to the correct scale size). For the Rabid Models "Mini-Komet" ME163 we use a 4x4 propeller for the best performance. Rabid Models offers several propellers in our catalog.

In this package the aluminum mount and 2mm bullet connectors are included with the motor. A prop adapter or O-ring propsaver is required (not included, sold separately). The motor shaft diameter is 2.0mm. For best results we strongly recommend using a removeable "threadlocker" compound on the tiny grub screws that hold the motor to the mount. In most cases you'll also need a wood "firewall" (available separately).

As with all brushless motors, a brushless ESC is required (available separately). Current draw is around 5-6 amps. The direction of rotation can be reversed by switching any 2 of the 3 motor leads.

We also offer custom-designed 3D-printed spinners to fit this motor and our 3-bladed props. (the picture shows our P38 spinners with regular and CR propellers. The spinners and propellers are NOT included with the motor)