Disposable fine-point glue tips for CA

These disposable tips are literally the first product that we started with, even before we started designing the models. These tips were originally used with standard "conical nozzle" glue bottles, but will also work with the new "Pin-Cap" bottles.

Note: The end of the tip has an extremely small hole. The tip is made of Polypropylene (just like the glue bottle) so it resists clogging - but when it does clog just toss it out and use a new one.  When using "pin-cap" glue bottles, the base of the disposable tip will need to be shortened so that it will fit properly.  (Cut the base end to shorten it by about  3/8") 

WHY USE THESE THINGS?  The main reason is control - you can stop splashing thing CA and apply it very precisely.  The Glue tips also provide a very handy extension (so you can apply the CA glue into tight spaces). They work especially well with thin CA, but the tips can be used on medium CA as well. The tip can be left on the bottle, but if you're not using the glue for a while then discard the disposable tip and replace the bottle cap for best shelf life.

A 1oz bag contains approximately 70-75 pcs. and the 2 oz bag which contains approximately twice as much!   The rack has 96 pcs (and the rack is handy for storing drill bits, Q-tips, or other things) We recommend purchasing the tips as an "add on" whenever you purchase CA glue, instead of paying postage for the tips by themselves.

The glue is not included!