Edge Sander Tool PARABOLIC - for shaping BALSA LE & TE

The new PARABOLIC version of our popular 3D-printed sanding tool is specifically designed for small models - for preparing your balsa aileron and elevator leading and trailing edges.  This tool doesn't simply round over the edge of the balsa, it has a parabolic shape for the perfect aerodynamic result.

The sides of the tool are flat which provide a good grip and can be handy for other small jobs. This tool is meant for smaller-size balsa parts, such as 3/32, 1/8, 3/16 thicknesses. It can also work on sandable foam!

These tools fit in your hand like a toothbrush!

The tools come with 150-grit sandpaper attached. Note: the color of the paper may vary depending on the stock that's used. You can remove the paper if needed by applying foam-safe CA activator to dissolve the glue. New sandpaper can be attached using a spray contact cement such as 3M brand "77".

The length of the paper is about 2 1/3 inches (6cm) - these tools are small (about 4 inches long including the handle) and are purposely intended for small jobs and precision work. The sandpaper wraps around the sides providing additional flat sanding surfaces for other uses.

Here is a 16-minute video which demonstrates how these tools are used in detail!

This video shows our new Centerline Marker/Hinge slotter in conjunction with the sanders!

Material: 3D-printed PETG Plastic with 150-grit sandpaper

Size: 120x60x10mm (about 4.5 inches long x 1/2" wide and 1/2" tall

Weight: 5-7 grams each (varies by type)

NOTE: we also have a Centerline Marker/Hinge Slot Tool, available in 4 sizes! All of these products were originally designed by Rabid Models and Fun Scale Models, Made in the USA, Copyright © 2024.

We plan to make larger versions eventually and we can also make double-ended versions. Contact us if you're interested!