Hobbyking 10amp ESC with 5V-1A UBEC for 2 or 3 Lipos

This is a very lightweight ESC (electronic speed control) from brushless motors, meant for small "park flyer" or indoor R/C aircraft only. Can be used with 2S or 3S Lipo.

Note: this item has a confusing label. It is a 10-amp ESC with a 1-amp BEC function.

This means that the ESC can run a 10-amp brushless motor. The BEC can supply up to 1 amp (5V) current for the servos and receiver. The part does not come with bullet connectors for the power wires but does have the receiver connector.

Supply is limited - sold out when gone!

Specifications

• Constant Current: 10A
  Burst Current: 12A
  Battery: 2-3S Lipoly / 5-8s NiMH or NiCd
  BEC: 5v / 1A
  Motor Type: Sensorless Brushless
  Size: 26x5x18mm
  Weight: 8g
• Programming Functions:
  Battery Type: Lipo /NiXX
  Brake: On / Off
  Voltage Protection: Low / Mid / High
  Protection mode: Reduce power / Cut off power
  Timing: Low / Mid / High
  Startup: Fast / Normal / Soft