We have SEVEN small wheels that you can choose from. These can be used as tailwheels or even main wheels on small models. The 3D-printed ones can be used with 1/16 or smaller wire (marked "3DP").
The smallest one is a foam "fat" tailwheel and hub, 16x10.4mm (about 5/8" by 1/2") - in a package of two. 0.5gm each. 2mm axle hole.
The one for Derek Micko's FSM CORSAIR) is 3/4" (19mm) in diameter and 1/4" (6.3mm) thick. Weight is just over 1 gm. 3D-printed Tire and Hub is assembled.
There's one that's 25mm in diameter (1") and 1/4" (6.3mm) thick. Weight is 1.7 gm. 3D-printed Tire and Hub is assembled.
The remaining ones are larger. The 3D printed ones have flat hubs - simply glue onto each side of the tire. The last two are plastic mag hubs with foam tires, sold as pairs.
The 3D-printed tire is hollow black TPU and the hub is white PETG. There is a very small "starter hole" in the hub which the customer can drill out (BY HAND) for the wire axle. You will need to use a small retainer or collar, that is not included. Guess what, we have those if you need 'em.
Since these wheels are so small, we recommend adding it to other items in your cart. Its probably not worth the postage to order a wheel by itself!
