Steering arm for 1/16" wire (2pcs)

This custom-designed 3D-printed part is for steering a 1/16" (1.6mm) landing gear wire, such as on a nose gear or tail wheel.  Its meant to be glued onto the landing gear wire with thin CA, then operated with a 1/32" pushrod to a servo.  Hopefully the pictures are explanatory. This is made for use with SMALL models. Sold in a pack of 2 pcs.

Dimensions:  The arm is about 1 inch long and 1/16" thick with 4 pushrod holes on each side, and the center is 3/16" tall. Suitable for 1/16" landing gear wire (not included). The pushrod holes are for 1/32" wire (not included).  Weight: 0.5gm each. White PETG plastic.

The center can be drilled out to use larger size wire.  This picture shows a Rabid Models 1" Tailwheel to illustrate a typical setup.  The wire, wheel, and pushrod are not included!

This product was designed and manufactured by Rabid Models and Fun Scale Models, Copyright © 2025  Made in the USA.

We also make a version for smaller 1/32" wire.  Click Here!