Steering arm for 1/16" wire and collar (2pcs)

This custom-designed 3D-printed part is for steering a 1/16" (1.6mm) landing gear wire, such as on a nose gear or tail wheel.  Its meant to be used with a 1/16" wheel collar (not included) which is glued into the part with thin CA - and operated with a 1/32" pushrod to a servo.  Hopefully the pictures are explanatory. This is made for use with SMALL models. Sold in a pack of 2 pcs.  The wheel collar and wire is not included!

Dimensions:  The arm is about 1 inch long and 1/16" thick with 4 pushrod holes on each side, the center is 3/16" thick. Suitable for 1/16" landing gear wire. The pushrod holes are for 1/32" wire.  Weight: 0.5gm each. White PETG plastic.

This shows a Rabid Models 2" Corsair wheel to illustrate a typical setup.  The wheel collar, wire, wheel and pushrod is not included!

This product was designed and manufactured by Rabid Models and Fun Scale Models, Copyright © 2025  Made in the USA.

We also make a version of this arm that simply glues onto the wire.  Click Here!