ULTRA-SMALL 5-amp ESC (Electronic Speed Control) for BRUSHED motors

This ESC is for small BRUSHED motors. This is for 1S or 2S power only!   

Its just a tiny circuit board that you'll need to solder the wires onto. Available with the wires for battery and radio connection, or you can purchase it without the wires if you prefer!

Note:  this ESC does NOT have built-in protection from thermal overload, current overload, reversed polarity, or signal loss.  The ESC does NOT have a BEC.

SPECIFICATIONS:  

Size: 17 x 17mm - about 3mm thick 

Weight: 1.8 gm (5gm with battery and radio wires)

• No brake
• Color: green
• Power - use 1S-2S LiPo battery or 6S NiMh/NiCd
• Maximum current 5A

Click here to see the wiring instruction sheet.