3D-printed wheel parts for the Fun Scale Models FW-190

Description

In addition to the FW190 spinner from Rabid Models, we also have some additional lightweight wheel and tire parts which were designed specifically for the Fun-Scale Models FW-190 model!  We have a scale black rubber tire, and two different scale wheel hubs!  Please see the pictures below!

Airplane not included!  This picture shows original Derek’s prototype model WITHOUT the new custom 3D parts.  The “Fun Scale Models” FW-190A Park-flyer is offered as a laser-cut short kit by Manzano Lazer works (click here).  In addition to the wheels listed here, Rabid Models also offers a custom-designed 3D-printed 3-blade spinner for the FW190 (click here for the spinner) and we sell the motor and propeller as well.

PARTS SPECIFICATIONS:

SCALE FW190 TIRE: black flexible TPU with tread detail.    44.1mm diameter (1.73 in.), 9.8mm width.    (Note: 2 tires are required for the model)

DETAILED WHEEL HUB: white PETG.    28mm diameter (1.1inch) — 2 hub halves make wheel hub – order one set for each tire.  Glue onto the tire.  Drill holes for your axle.  The hubs are not painted.  Two types are available (smooth hub and mag hub)

Weight: about 7 gms total for one complete assembly (one tire and one hub set).

NOTE: the FW190 will require two sets of tires and wheel hubs.

3D-printed parts are unpainted but require very little preparation – they can be painted with any plastic-compatible paint.  Painting is recommended because all plastics will deteriorate over time if exposed to sunlight.  The wheel hub parts and bomb parts can be glued together with CA or Foam-Tac cement.  The two hub halves are designed to be glued onto the wheel and have starter holes for the axle – drill out the holes to match the axle wire size you are using.